The Gun Room offers you the opportunity to purchase the STE PRO Standard Pistol Grip Stock for a Beretta DT11.
Providing solutions
The cylinder head is made of high-performance aeronautical aluminium in terms of hardness and reliability.
Movements:
The whole body can be moved longitudinally on the grip's recess
Drop:
Simply loosen the central tightening and release a screw and adjust the opposite tightening to make the cylinder head drop.
Advantage:
As simple as the previous one. The central tightening is loosened and the desired advantage can be set for both right- and left-handed users by simply loosening one screw and tightening the one on the opposite side.
Stock Length:
An inner tube on the stock body with a mechanical stop adjustment inside and a tube clamping screw will set the desired stock length.
Pitch:
On the long tube itself, at the back, and made of a single piece, is the pitch adjustment that is regulated both at the exit and at the fall. Loosening the central tightening and loosening a screw or tightening the opposite screw depending on whether more or less PITCH is desired.
Outlet:
In the corner guard, two curved slots, one at the top and one at the bottom, allow us to make the adjustment by simply tightening a screw to the desired measurement.
Montecarlo:
With the two screws inserted into the curved slots and sliding one plate up and down over the other, we can give it the desired Monte Carlo.
Adjustable back height and lateral and longitudinal movement of the same:
As its name indicates, the back is adjustable in three dimensions, with the rods of the same it can be moved both to the right or left and in height. The height is adjustable tenth by tenth with adjustable screws in the body of the stock. The movement forward or backward of the back is carried out on the two sliding plates of the same by simply loosening and tightening to the appropriate extent two screws.
Weight: Although the weight is very low and is practically balanced on any weapon, the butt plate is designed to be balanced by adding weight in increments of 5 grams.
All adjustments on the weapon are marked millimetre by millimetre with high-precision laser marking.
All these improvements and movements are accessible with just a 4 and 5 diameter hex key.